mr_milo
Active Member
- Joined
- Jul 29, 2014
- Messages
- 232
- Reaction score
- 124
- Country
- United States
- Dash Cam
- Mini 0803 (Front) Mobius (Rear)
Yeah, I was still in "prototype mode" and was really only trying to see if it would work at the time. I didn't get too complicated with it, just used some 1/16" heat shrink on the leads of the capacitor, 3/32" heat shrink on the solder joints.
I was then going to just double stick tape it to the case of the mini BUT the bright green case of the capacitor pack bothered me so I added some 3/4" heat shrink over the whole thing first.
For my purposes it works and really doesn't look too bad mounted since most of it is behind the mirror or transponder. Obviously this wasn't done for mass market but works for the hobbyist. I'm sure I could come up with a cleaner solution but it works so I'm not really inclined to mess with it.
I was then going to just double stick tape it to the case of the mini BUT the bright green case of the capacitor pack bothered me so I added some 3/4" heat shrink over the whole thing first.
For my purposes it works and really doesn't look too bad mounted since most of it is behind the mirror or transponder. Obviously this wasn't done for mass market but works for the hobbyist. I'm sure I could come up with a cleaner solution but it works so I'm not really inclined to mess with it.