Mobius mounting holder

Tony lovelock

Active Member
Joined
Jan 18, 2017
Messages
585
Reaction score
131
Location
Hampshire
Country
United Kingdom
Dash Cam
Nextbase 422gw/Nextbase 212G & möbius C3 wide angle lens
what is the correct thread name for the möbius mounting holder plastic centre lug? I know it's 1/4" but will a unc/whitworth threaded bolt screw into this? It's the small black plastic centre piece that will screw in the many tripod adapters. Thanks
 

SawMaster

Well-Known Member
Joined
Apr 10, 2015
Messages
8,140
Reaction score
7,070
Location
SC
Country
United States
Dash Cam
Numerous and ever-changing
That and all standard tripod threads are nominally 1/4 inch diameter with 20 threads per inch, usually referred to as "1/4-20" or "1/4 UNC". This is an American thread size but is a worldwide standard. There are other tripod mounting thread sizes but they are uncommon. Look for either the 1/4-20 designation or the word "standard" ;)

Phil
 

jokiin

Well-Known Member
Manufacturer
Joined
Jan 27, 2013
Messages
51,199
Reaction score
29,241
Location
Sydney, Australia ~ Shenzhen, China
Country
Australia
Dash Cam
Too many ¯\_(ツ)_/¯
the thread size is standard, I have found the fitting on the Mobius is quite short though and I have a few different mounts that bottom out before becoming tight which necessitates having to add some washers or whatever to space it out a bit or you can't lock it down
 
OP
Tony lovelock

Tony lovelock

Active Member
Joined
Jan 18, 2017
Messages
585
Reaction score
131
Location
Hampshire
Country
United Kingdom
Dash Cam
Nextbase 422gw/Nextbase 212G & möbius C3 wide angle lens
Thanks, will look on eBay for a countersunk version then!
 
Thread starter Similar threads Forum Replies Date
A Mobius 22
J Mobius 24
J Mobius 12
Z Mobius 6
Mtz Mobius 1024
Top