I'm not sure how useful this is, but I just found out that Novatek NT96655 is able to record 1600x900 @ 50 fps.
60 fps is too much, but 50 works.
Tachograph NT96658 is now among the most high-end Novatek recorder program called top-level operating parameters of the industry; image sensor uses CMOS SONY image sensor (car recorder uses more series AR Micron, OmniVision OV series, and is currently the best in the industry is a CMOS Sony, SONY low illumination globally recognized as well); 7 glass lens uses a Sony HD camera, 12 million pixels, 1080P (1920 * 1080P) HD picture quality, Tachograph has 170 ° super wide-angle, 60 frames per second speed (720p) processing, fully automatic loop recording, do not leak seconds.
https://club.1688.com/article/60085068.html
So NT96658 supports 60 frames?
I also saw 'dumpuitron', 'dumpecos' and 'dumpdsp' commands mentioned in a fw file.It should work with the command "mem dumpcode"
Sounds plausible, unfortunately I dont have a camera with uitron nor eCos kernel (so I dont have these commands).I also saw 'dumpuitron', 'dumpecos' and 'dumpdsp' commands mentioned in a fw file.
Well, if know how to work with the firmware, backup would be received through the Programmer USBaccess to shell via uart is required.
Put on smart program FN CamI am trying to modify video bitrate. But seems like I'm doing something wrong. As my dascam does not have screen, I need to go to my car every time I want to flash it.
So to get the bitrate of 20?It's a file I have found on the web. Guess it is a file from dashcam seller or something like that.
Thank you!vvs49, there you go:
Oh, seems like it's a different DVR. You better ask your seller to send you a firmware file first. Tell him you have some problems with your current firmware. And then we will modify it togetherBut if not mine, get a brick ??
I asked, not firmware.You better ask your seller to send you a firmware file first.