Parking Mode Sensitivity 10 but NO recording

[MMM123]

Parking Mode Sensitivity 10 but NO recording ?

I setup my dashcam's parking mode sensitivity to 10 on all options but the camera isn't recording any events. It does tell me that "an impact was detected in parking mode", but nothing is recorded

Normal recordings, event recordings and even manual recording are good, the parking mode isn't really working for some reason, although as mentioned it does tell me an impact was detected

Motion detection is set to 0 or OFF because if I enable it, the memory card will be filled with people walking/passing by, so not really useful if I usually park near a high pedestrian area.

Any ideas or tips are appreciated.

Thanks!

 

[bpsmicro]

Motion Detection to 0 means no Parking Mode recordings will be made. The Sensitivity is purely for Event recordings. The "Impact" you reference will have an associated Event recording.

Basically you explicitly told it, by setting motion detection to 0, to never record Parking Mode.