I just got the A129 duo cam with a hardwire kit bundle. I installed everything properly, ran the ACC and BATT+ cables to the respective 5amp outputs, piggyback fuses, grounded, etc.
Upon finishing the install, the camera worked for about an hour. I noticed the camera kept restarting, and that the rear camera was no longer displayed on the main screen. It kept flickering, fading out slowly until it was completely black and restarted again. I troubleshooted this using many different configurations.
I remedied the issue by unplugging the rear camera from the front camera. I had also tried using the USB port in my car instead of the fusebox. Same issue; and unplugging the rear camera fixes the issue.
Did I get a lemon? It seems like the front camera isn't keeping up with supplying the proper power to the rear camera.
Upon finishing the install, the camera worked for about an hour. I noticed the camera kept restarting, and that the rear camera was no longer displayed on the main screen. It kept flickering, fading out slowly until it was completely black and restarted again. I troubleshooted this using many different configurations.
I remedied the issue by unplugging the rear camera from the front camera. I had also tried using the USB port in my car instead of the fusebox. Same issue; and unplugging the rear camera fixes the issue.
Did I get a lemon? It seems like the front camera isn't keeping up with supplying the proper power to the rear camera.