RavenManiac
Active Member
- Joined
- Jun 18, 2015
- Messages
- 899
- Reaction score
- 184
- Location
- Williamsburg, Virginia
- Country
- United States
- Dash Cam
- Viofo A129 Duo, mini 0806 (RIP)
I've tried using the A129 Duo setup for a few months now with a variety of beta firmware. Like others, I simply can't get the Auto-Event Detection to work consistently with the G-Sensor, regardless of my sensitivity settings. I'm now convinced that the G-Sensor is only good for crashes or big impacts.
However, motion detection works great! The only problem is the rear camera doesn't have built-in motion detection. So here's what I'm thinking. What would happen if I used a second A129 front camera for the rear, but wired them both together? That way I could use the very reliable motion detection to monitor the front and rear of the car while in parking mode.
I'm also thinking about purchasing a Cellink Neo to provide additional parking mode power for both cameras. Any thoughts and/or advice is much appreciated.
However, motion detection works great! The only problem is the rear camera doesn't have built-in motion detection. So here's what I'm thinking. What would happen if I used a second A129 front camera for the rear, but wired them both together? That way I could use the very reliable motion detection to monitor the front and rear of the car while in parking mode.
I'm also thinking about purchasing a Cellink Neo to provide additional parking mode power for both cameras. Any thoughts and/or advice is much appreciated.