sidepipe
New Member
My 522gw has started intermittently not entering record mode when first powered up. It used to be reliable, and I don't think anything's changed. Sometimes, you get a message saying the card needs to be formatted, but if you dismiss that and press record everything works fine ( as it does if the request to format doesn't appear but it doesn't record on its own. ) Any ideas? It's not the end of the world, but obviously could be an issue if I forget to check that it's recording....
Nextbase support have been worse than useless, claiming my Sandisk High Endurance 128Gb card isn't good enough - I've pointed out that a) It works fine once the camera actually starts to record and b) its minimum write speed is around 8x faster than is actually required They also repeat the mantra about formatting the card every 2-3 weeks, despite the fact I've told them it often doesn't get more than a few hours use in that time..... ( but in any case, the card was formatted in the camera. ) I did try a new card ( admittedly of the same type, but as I say, I know the specs are fine! )
Nextbase support have been worse than useless, claiming my Sandisk High Endurance 128Gb card isn't good enough - I've pointed out that a) It works fine once the camera actually starts to record and b) its minimum write speed is around 8x faster than is actually required They also repeat the mantra about formatting the card every 2-3 weeks, despite the fact I've told them it often doesn't get more than a few hours use in that time..... ( but in any case, the card was formatted in the camera. ) I did try a new card ( admittedly of the same type, but as I say, I know the specs are fine! )