PhilSkill
New Member
- Joined
- Jun 3, 2018
- Messages
- 25
- Reaction score
- 6
- Country
- United Kingdom
- Dash Cam
- Blackvue 750S-2Ch Cellink-Neo6
Since putting my Blackvue 750S-2Ch on a Celllink Neo i've noticed i'm having trouble connecting to the camera if the car is in parking mode and has been idle for a few hours. Although the Wifi Light is lit in parking mode I cannot connect to it over the cloud or via a tablet. And yet if I switch off the supply and restart the Blackvue, I can then connect both to cloud and to Wifi direct, so the settings all seem to be ok.
I am running the Newer 1.007 firmware, but also had this issue with 1.006, I'm not sure if the 1.005 firmware had this issue as I've also only just got the Neo and enabled Parking Mode.
I notice there are Wifi Auto on and off, but these are greyed out in the settings with [Off] checked.
Is the Wifi timing out? I've run out of ideas as to why this is not working now I have Parking mode and permanent power to the camera.
Thanks for any ideas!
I am running the Newer 1.007 firmware, but also had this issue with 1.006, I'm not sure if the 1.005 firmware had this issue as I've also only just got the Neo and enabled Parking Mode.
I notice there are Wifi Auto on and off, but these are greyed out in the settings with [Off] checked.
Is the Wifi timing out? I've run out of ideas as to why this is not working now I have Parking mode and permanent power to the camera.
Thanks for any ideas!