I had the 0906 installed with the accompanying parking guard kit. But the parking guard function doesn't seem to be working. The parking guard kit was installed by by the shop.
Base on the test WA3PNT did in the thread,
https://dashcamtalk.com/forum/threads/new-0906-hardwire-kit.30868/page-2
Set Voltage = 12.4 Actual turnoff Voltage = 12.1 Actual turnon Voltage = 12.4
Set Voltage = 12.2 Actual turnoff Voltage = 11.9 Actual turnon Voltage = 12.1
Set Voltage = 12.0 Actual turnoff Voltage = 11.7 Actual turnon Voltage = 11.9
Set Voltage = 11.8 Actual turnoff Voltage = 11.5 Actual turnon Voltage = 11.7
The parking guard kit is set to 12.4V.
With all possible combination of the 0906 setting of the PARKING GUARD and MOTION DETECT
When car turn off, the 0906 turns off, all LEDs are off. No videos are capture after that. Trying to induce motion, by physically moving the 0906 does nothing.
Is there something else that needs to be done to getting the parking guard to work?
Base on the test WA3PNT did in the thread,
https://dashcamtalk.com/forum/threads/new-0906-hardwire-kit.30868/page-2
Set Voltage = 12.4 Actual turnoff Voltage = 12.1 Actual turnon Voltage = 12.4
Set Voltage = 12.2 Actual turnoff Voltage = 11.9 Actual turnon Voltage = 12.1
Set Voltage = 12.0 Actual turnoff Voltage = 11.7 Actual turnon Voltage = 11.9
Set Voltage = 11.8 Actual turnoff Voltage = 11.5 Actual turnon Voltage = 11.7
The parking guard kit is set to 12.4V.
With all possible combination of the 0906 setting of the PARKING GUARD and MOTION DETECT
When car turn off, the 0906 turns off, all LEDs are off. No videos are capture after that. Trying to induce motion, by physically moving the 0906 does nothing.
Is there something else that needs to be done to getting the parking guard to work?