Hello guys,
I've been trying lots of times to record videos at those bitrates but i can't get the camera to record a single video file.
If i record at 40mbps all goes smooth no problems but as soon as i set 45 or 50 mbps the video file starts to slit up in 2 , 3 or more bits each one with different bitrates Eg. 1st file 45mbps 2nd file 37mbps then 25mbps and so on....
Whats going on? I've always used the fastest memory cards on the market (sandisk extreme) and today i've got a Samsung PRO 32gb read 90MB/s write 80MB/s but the issue persists.
Also this is the script that i use on FW 1.2.12
#vibrance/saturation adjustments
t ia2 -adj ev 0 0 140 0 0 150 0
#shadow/highlight clipping adjustments
#this makes blacks not crushed
t ia2 -adj l_expo 163
#fullHD 60 fps 40 Mbps
#writew 0xC05C1EE2 0x4220
#fullHD 60 fps 45 Mbps
#writew 0xC05C1EE2 0x4234
#fullHD 60 fps 50 Mbps
#writew 0xC05C1EE2 0x4248
#4GB no split files
writew 0xC03A8620 0x2004
#disable sharpening
#t is2 -shp mode 0
#t is2 -shp cor d:\coring.txt
#de-noise values between 0-16383 (0x0000-0x3FFF)
t ia2 -adj tidx -1 1500 -1
what am i doing wrong??
I've been trying lots of times to record videos at those bitrates but i can't get the camera to record a single video file.
If i record at 40mbps all goes smooth no problems but as soon as i set 45 or 50 mbps the video file starts to slit up in 2 , 3 or more bits each one with different bitrates Eg. 1st file 45mbps 2nd file 37mbps then 25mbps and so on....
Whats going on? I've always used the fastest memory cards on the market (sandisk extreme) and today i've got a Samsung PRO 32gb read 90MB/s write 80MB/s but the issue persists.
Also this is the script that i use on FW 1.2.12
#vibrance/saturation adjustments
t ia2 -adj ev 0 0 140 0 0 150 0
#shadow/highlight clipping adjustments
#this makes blacks not crushed
t ia2 -adj l_expo 163
#fullHD 60 fps 40 Mbps
#writew 0xC05C1EE2 0x4220
#fullHD 60 fps 45 Mbps
#writew 0xC05C1EE2 0x4234
#fullHD 60 fps 50 Mbps
#writew 0xC05C1EE2 0x4248
#4GB no split files
writew 0xC03A8620 0x2004
#disable sharpening
#t is2 -shp mode 0
#t is2 -shp cor d:\coring.txt
#de-noise values between 0-16383 (0x0000-0x3FFF)
t ia2 -adj tidx -1 1500 -1
what am i doing wrong??