Dan-UK1415
Well-Known Member
- Joined
- Aug 14, 2018
- Messages
- 451
- Reaction score
- 383
- Country
- United Kingdom
- Dash Cam
- BlackVue Elite 8 & Viofo A329T
This thread can be used by anyone to ask questions or bring up the various possibilities of remote streaming.
@VIOFO-Support
I've enabled Station Mode on my A329T (press mic+WiFi button). I've set the home WiFi settings in the firmware settings, and it manages to connect fine.
It also remembers my preference and turns WiFi mode back on when the camera turns off/on again - so I don't need to mess around with re-enabling it.
I've also setup an RTSP stream to have a live view (just as a test, as I'm playing around with the possibilities).
My question is - how do I do RTSP from the various connected cameras?
Just doing: RTSP://(device IP address)
It shows the live feed from my telephoto lens.
I'd prefer to see the feedback from the main front camera.
But is it possible to select between them in any settings, or am I stuck with just that one feed which will only change to another camera if I disconnect one's I don't want to live view?
Also, is there any way to increase the feed quality? It typically streams at a low quality, is there any potential for it to stream at a higher quality - or have an option of low/high?
@VIOFO-Support
I've enabled Station Mode on my A329T (press mic+WiFi button). I've set the home WiFi settings in the firmware settings, and it manages to connect fine.
It also remembers my preference and turns WiFi mode back on when the camera turns off/on again - so I don't need to mess around with re-enabling it.
I've also setup an RTSP stream to have a live view (just as a test, as I'm playing around with the possibilities).
My question is - how do I do RTSP from the various connected cameras?
Just doing: RTSP://(device IP address)
It shows the live feed from my telephoto lens.
I'd prefer to see the feedback from the main front camera.
But is it possible to select between them in any settings, or am I stuck with just that one feed which will only change to another camera if I disconnect one's I don't want to live view?
Also, is there any way to increase the feed quality? It typically streams at a low quality, is there any potential for it to stream at a higher quality - or have an option of low/high?