luckylz
Active Member
- Joined
- Apr 8, 2015
- Messages
- 414
- Reaction score
- 107
- Country
- China
Sorry, I don't know anything about the electronics design. So I just request one of my friends to give me a solution:
1. plug-in USB power;
2. wait about 5 seconds;
3. shortcut the power on button (means a single click the button).
Then we can achieve the automatically power on when having USB power.
Why need to hardware mod? Cause I heard rumors that Yi Cam doesnot have the hardware to control when USB power on.
Here is just the desgin, I'm sure about it's correct or not. I like to share with you guys, and see if someone can have a try first?!
P.S. - the TLP127 pin-4 & pin-6, will connect to the power on button.
SW1 is the power on/off button:
1. plug-in USB power;
2. wait about 5 seconds;
3. shortcut the power on button (means a single click the button).
Then we can achieve the automatically power on when having USB power.
Why need to hardware mod? Cause I heard rumors that Yi Cam doesnot have the hardware to control when USB power on.
Here is just the desgin, I'm sure about it's correct or not. I like to share with you guys, and see if someone can have a try first?!
P.S. - the TLP127 pin-4 & pin-6, will connect to the power on button.
SW1 is the power on/off button: