jpp
New Member
- Joined
- Dec 31, 2017
- Messages
- 8
- Reaction score
- 0
- Country
- United States
- Dash Cam
- BlackVue DR750S-2CH
So I got the DR750S-2CH for Christmas and installed it yesterday. Install was a breeze, but that's where the fun stops. I drove around a bit and then took my SD card into the house to check video quality, angles, settings, etc. When I opened the footage, I had one or two clips of perfectly fine video, and then the rest of the front camera files had this awful green and pink static over it to the point where you couldn't see anything (photo 1). I adjusted the settings to some of the "recommended settings" I saw online, and gave it a second chance. When I plugged the SD card into the computer again, all of the front camera files were now just the rear camera. So it was a FR file with the main image being the rear camera (still with the awful static) and then the little PIP was also rear footage. Same thing when I checked the rear footage, except the scenario was flipped. The main picture was clear, although it was slightly stuttering and seemed slowed down. Audio works fine, though. But the PIP had the static (it was still the rear footage). So I reverted all the settings to stock and tried it again - still the same thing. On top of that, I now get an error message 80% when I try to open a clip, and it closes the entire program (photo 2).
Thoughts?
Thoughts?