bmw

  1. M

    Hardwiring Viofo A139 to 2015 BMW 4 Series Gran Coupe F36

    A couple of weeks ago I hardwired the A139 into my BMW and thought I would just do a bit of a write up as it may help others with hardwiring their cameras especially given the issues that are sometimes encountered as a result of the battery management systems on modern vehicles. For the...
  2. dash riposki

    Parking garage 'road rage', complete with sword brandishing Twit, and a BMW!. (Thailand)

    The only injury was the female, who tried to deflect the sword when the jerk thrust it inside the Honda passenger compartment, and has some minor cuts on her hand.
  3. S

    BMW Advanced Camera Eye

    Hi, New to the forum. I have a BMW Dashcam, the so-called Advanced Camera Eye. Is anyone familiar with this? (although I am pretty sure it's just a badged/OEM version of another dashcam, I doubt it's specially developed by BMW). A couple of questions (which I have asked of my dealer but they...
  4. M

    BMW F10 (2014)

    Hi All Had a thinkware F770 for about 6 weeks, Working well. Just got a cellink B and going to install soon. As any BMW owner will know, most of the circuits stay hot for about 20 mins after ignition off. Anyone know which fuse (circuit) gets cut as soon as the ignition goes off, so that it...
  5. T

    BMW MINI (R56) Best internal fuses to tap (Answer)

    This is not a question, but I thought it would be useful as an easy to search for post. The answer is: Permanent Power: Use the ODB (5A) fuse. That's F27 on my MINI but that might vary. This circuit remains live for > 12 hours under my tests, so safe to presume it is truly a permanent live...
  6. Mozzie

    BMW cannot merge

  7. S

    BMW 4ch DashCam Setup; whats best?

    Greetings to everyone here, This is my very first post in this forum and im glad to be here with great people. So i own a BMW 2009 e92 coupe'. I would like to install a 4ch camera setup. (1. Front, 2. 2x Sides (ideal would be in the side mirrors) but if its not possible, side windows would be...
  8. P

    PMP install on 2010 BMW 328i xDrive

    For those who have this car or similar, here are some photos of the fusebox with labels that might help someone as reference: I ended up using two 10Amp fuses in my fuse taps, and used fuse #3 as Batt always on fuse #17 as ACC+ for ignition on
  9. M

    hardwiring blackvue powermagic pro in e60

    Hi Noobie here. Sorry if this has been covered before but wondering if anyone knows how to best hardwire the blackout power magic pro to an e60 5 series without going to the fuse box? I have a dr650 and would like to get a constant power feed and switched power without messing about with fuse...
Top