I am using Registrator Viewer. The timezone is set in the 0805 and in Registrator Viewer. Should I leave one set as GMT? Am I getting GMT +11 +11?What are you playing back on? Registrator Viewer has a time zone setting under 'View'.
Thanks, easy when you know where to look.you've set the timezone in the camera to +11?
it's to the left of the time and date settings and not easy to see
No just my 32x magnification reading glassesyou must have misplaced your comprehensive, easy to read user manual
You could read the 0806 online manual, there are a few differences and extras but the time setup is the same: http://www.mini0806.com/firmware/mini0806 manual V2.pdfPlease excuse my newness to the Dash Cam and newby questions. Being very familiar with GPSs I soon sussed that when I entered local time it stayed as is until the GPS connected and changed to GMT. I was happy to leave it on GMT (an old sailor) but then I came across this thread.
So silly question time - how do I actually get the system to stay on local time and not switch to GMT when the GPS is connected. I only have the wowful manual that says nothing (surely someone has better manual - I came across this forum looking for an online manual).
Obviously from comments on here you use Registrator Viewer but what is this??
Apologies again for the dumb question.
Garry
playback software http://www.registratorviewer.com/index_en.htmlObviously from comments on here you use Registrator Viewer but what is this??
In Registrator Viewer, select the menu Playback, select the menu Renderer, select the menu VMR. Ignore that it says "Windows XP". It will probably now work fine although it may sometimes be slightly jerky.Thanks for the last two posts - very helpful.
This leads me to my next issue (I will put here as it follows on from the viewer).
I have a mid to high end Laptop - relatively new, fast, lots of RAM and a very good graphics card. It plays most of the Dash Cam video files with Windows Media Player but some of the video files bring up the blue screen of death and crashes the computer - this only happens with the 0805 video MOV files (I have never had the issue before) - resolution settings on the dash cam don't seem relevant. I just installed RegistratorViewer and using it to open the files causes the same thing.
Any ideas.
Thanks
Garry
I didn't know that works in Registrator Viewer ... tried it and it doesn't ... is there an option somewhere to enable it?Double click the video for full screen mode
Then I will wait until it does arrive, no point upgrading twice and the version I have doesn't appear to need any mini fixes!The next version should be due any time with the Mini fixes in there.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
K | 0805 battery issue? | Mini 0805 | 1 | |
P | Firmware for 0805 Original? [Non-Mini] | Mini 0805 | 1 | |
C | New Mini 0805 Video Washed Out | Mini 0805 | 15 | |
Mini 0805 randomly shuts down due to desoldered processor | Mini 0805 | 0 | ||
Mini 0805 Getting Hot, then Shutting Down | Mini 0805 | 2 |