- Joined
- May 1, 2013
- Messages
- 10,668
- Reaction score
- 6,561
- Location
- Dublin
- Country
- Ireland
- Dash Cam
- Street Guardian UK / EU / EEA Distributor
I wanted to make low profile mount for Panorama G, but with option of quick mount / dismount.
Below is result.
![Panorama G DIY mount (1).jpg Panorama G DIY mount (1).jpg](https://dashcamtalk.com/forum/data/attachments/11/11477-e3ebd8675ce0e253081f7dd431312954.jpg?hash=4-vYZ1zg4l)
Below is how my new DIY low profile mount compares to some other aftermarket mounts.
DIY mount is from the right side.
![Panorama G DIY mount (2).jpg Panorama G DIY mount (2).jpg](https://dashcamtalk.com/forum/data/attachments/11/11478-504b90f6197146b4a783ace908b9e708.jpg?hash=UEuQ9hlxRr)
DIY process:
I took mount which is used on DR32 Dashcamera.
DR32 mount allows to use it in 3 ways: slide in/out from left side, from right side and from top, so it can be mounted on left- or right side from rearview mirror arm.
![Panorama G DIY mount (3).jpg Panorama G DIY mount (3).jpg](https://dashcamtalk.com/forum/data/attachments/11/11479-491b5ac9bd911595d26ed41faa048e50.jpg?hash=SRtayb2RFZ)
Also took a standard generic t-bracket suction mount
![Panorama G DIY mount (4).jpg Panorama G DIY mount (4).jpg](https://dashcamtalk.com/forum/data/attachments/11/11480-476112834e7539f8cb9911a2dcf340e7.jpg?hash=R2ESg051Of)
![Panorama G DIY mount (5).jpg Panorama G DIY mount (5).jpg](https://dashcamtalk.com/forum/data/attachments/11/11481-10403b5f092b2753241a7e5c58e797ba.jpg?hash=EEA7XwkrJ1)
cut t-mount part from suction mount
![Panorama G DIY mount (6).jpg Panorama G DIY mount (6).jpg](https://dashcamtalk.com/forum/data/attachments/11/11482-9c169ab90e77fa668c136c002fb5572c.jpg?hash=nBaauQ53-m)
warmed-up a tripod screw on DR32 mount.
removed screw
cut excess plastic
![Panorama G DIY mount (7).jpg Panorama G DIY mount (7).jpg](https://dashcamtalk.com/forum/data/attachments/11/11483-11678cc1dadce2d2e72a954bfb177229.jpg?hash=EWeMwdrc4t)
filed down / sanded plastic surfaces to make it flat.
![Panorama G DIY mount (8).jpg Panorama G DIY mount (8).jpg](https://dashcamtalk.com/forum/data/attachments/11/11484-220731e0d62dd4df0944e4fb7df15824.jpg?hash=Igcx4NYt1N)
glued t-mount part from suction mount to DR32 mount.
final result.
![Panorama G DIY mount (1).jpg Panorama G DIY mount (1).jpg](https://dashcamtalk.com/forum/data/attachments/11/11477-e3ebd8675ce0e253081f7dd431312954.jpg?hash=4-vYZ1zg4l)
Below is result.
![Panorama G DIY mount (1).jpg Panorama G DIY mount (1).jpg](https://dashcamtalk.com/forum/data/attachments/11/11477-e3ebd8675ce0e253081f7dd431312954.jpg?hash=4-vYZ1zg4l)
Below is how my new DIY low profile mount compares to some other aftermarket mounts.
DIY mount is from the right side.
![Panorama G DIY mount (2).jpg Panorama G DIY mount (2).jpg](https://dashcamtalk.com/forum/data/attachments/11/11478-504b90f6197146b4a783ace908b9e708.jpg?hash=UEuQ9hlxRr)
DIY process:
I took mount which is used on DR32 Dashcamera.
DR32 mount allows to use it in 3 ways: slide in/out from left side, from right side and from top, so it can be mounted on left- or right side from rearview mirror arm.
![Panorama G DIY mount (3).jpg Panorama G DIY mount (3).jpg](https://dashcamtalk.com/forum/data/attachments/11/11479-491b5ac9bd911595d26ed41faa048e50.jpg?hash=SRtayb2RFZ)
Also took a standard generic t-bracket suction mount
![Panorama G DIY mount (4).jpg Panorama G DIY mount (4).jpg](https://dashcamtalk.com/forum/data/attachments/11/11480-476112834e7539f8cb9911a2dcf340e7.jpg?hash=R2ESg051Of)
![Panorama G DIY mount (5).jpg Panorama G DIY mount (5).jpg](https://dashcamtalk.com/forum/data/attachments/11/11481-10403b5f092b2753241a7e5c58e797ba.jpg?hash=EEA7XwkrJ1)
cut t-mount part from suction mount
![Panorama G DIY mount (6).jpg Panorama G DIY mount (6).jpg](https://dashcamtalk.com/forum/data/attachments/11/11482-9c169ab90e77fa668c136c002fb5572c.jpg?hash=nBaauQ53-m)
warmed-up a tripod screw on DR32 mount.
removed screw
cut excess plastic
![Panorama G DIY mount (7).jpg Panorama G DIY mount (7).jpg](https://dashcamtalk.com/forum/data/attachments/11/11483-11678cc1dadce2d2e72a954bfb177229.jpg?hash=EWeMwdrc4t)
filed down / sanded plastic surfaces to make it flat.
![Panorama G DIY mount (8).jpg Panorama G DIY mount (8).jpg](https://dashcamtalk.com/forum/data/attachments/11/11484-220731e0d62dd4df0944e4fb7df15824.jpg?hash=Igcx4NYt1N)
glued t-mount part from suction mount to DR32 mount.
![Panorama G DIY mount (9).jpg Panorama G DIY mount (9).jpg](https://dashcamtalk.com/forum/data/attachments/11/11485-ff8aab08d6bb24fa6f04802df18ff8ec.jpg?hash=_4qrCNa7JP)
final result.
![Panorama G DIY mount (1).jpg Panorama G DIY mount (1).jpg](https://dashcamtalk.com/forum/data/attachments/11/11477-e3ebd8675ce0e253081f7dd431312954.jpg?hash=4-vYZ1zg4l)