You can eliminate the power adapter if you temporarily substitute it with a battery power bank.
There are dashcams on the market that do not interfere with other equipment, maybe you could try one of them.
he was referring to the other GPS we have with the longer cable, that won't be the issue though, it's not the cameras GPS that causes the problem, it's the CMOS sensor in the camera that has an impact on your vehicle GPS which is not far below it under the top of your dashboard, in some cases it is possible to move the factory GPS antenna but that involves a bit of DIY and only if it has a long enough cable, that's not a suitable fix for for everyone, moving the camera is easier
yes completely understand, know what car companies are like when it comes to warrantyIf this car would not be new and still under warranty I would probably try that. But with so many electronic systems inside and reports of headunits failing for many people I would not risk Subaru denying warranty repair if something happens claiming it's because of my mod.
need to measure below the camera, how far is it from the top of the dashboard to the bottom of the camera?OK so I was able to take some measurements with TriField EMF Meter Model TF2 meter. The readings for AC electric field were really high comparing to any other device inside my car (like 10x more than anything else including speakers amplifier). Unfortunately I don't have any other dashcam to compare. I only have SG9665GC in other car and its readings were similar to SGGCX2PRO+. The highest reading was coming from back of the dashcam where LCD screen is (and CMOS sensor probably). Photo attached and link to video showing reading starting with hardwire adapter in fuse box going to dashcam and then dashcam GPS unit. Sorry for bad quality but I didn't have time to measure during the day and I had to return the meter next day.
@SotY
I want to install a Thinkware F770 in my Outback 2019 with EyeSight and Moonroof. Any ideas on how to remove the overhead console? Any bolts or screws there to remove or just clips?