FedeDC
New Member
- Joined
- Sep 19, 2018
- Messages
- 2
- Reaction score
- 0
- Country
- United States
Hello guys,
I'm installing a Smart Rearview mirror not a dash cam but the wiring is quite similar.
I need some help please. I saw similar posts about this in this forum but I need further clarifications I never did anything like this before.
I'm installing a Smart Rearview Mirror that gets the power directly from the Fuse Box. I have an Mk2 Audi TT 2008 2.0L Coupe.
I ran all cables and already installed the smart mirror. I need just to connect it to the fuse box.
I got 3 cables:
1x Red cable with ACC label (can I use an empty available space in the fuse box?)
1x Yellow Cable with BAT label (got also a "3" fuse on the cable itself) (can I use an empty available space in the fusebox?)
1x Black with GND label (where should I attach the ground? can I just connect the ground to one of the screws on the right of the fuse box?) see red mark
Also for the red and yellow cable how do I know which is the correct side to insert them in the fuse box? They are capable to connect directly to the fuse box. Should I create a "Add a Circuit Fuse Tap "Piggy for each cable or directly connect them to an empty fuse space?)
Can somebody please guide me where to connect these cables? in which fuse spot they should land?
I bought already a Multimeter in case I should do some testing but I never used one before could you please guide me how to use it... :}
This is what I got:
I'm installing a Smart Rearview mirror not a dash cam but the wiring is quite similar.
I need some help please. I saw similar posts about this in this forum but I need further clarifications I never did anything like this before.
I'm installing a Smart Rearview Mirror that gets the power directly from the Fuse Box. I have an Mk2 Audi TT 2008 2.0L Coupe.
I ran all cables and already installed the smart mirror. I need just to connect it to the fuse box.
I got 3 cables:
1x Red cable with ACC label (can I use an empty available space in the fuse box?)
1x Yellow Cable with BAT label (got also a "3" fuse on the cable itself) (can I use an empty available space in the fusebox?)
1x Black with GND label (where should I attach the ground? can I just connect the ground to one of the screws on the right of the fuse box?) see red mark
Also for the red and yellow cable how do I know which is the correct side to insert them in the fuse box? They are capable to connect directly to the fuse box. Should I create a "Add a Circuit Fuse Tap "Piggy for each cable or directly connect them to an empty fuse space?)
Can somebody please guide me where to connect these cables? in which fuse spot they should land?
I bought already a Multimeter in case I should do some testing but I never used one before could you please guide me how to use it... :}
This is what I got:
Attachments
-
IMG_0432.JPG253.6 KB · Views: 12
-
IMG_1064.JPG391.6 KB · Views: 12
-
IMG_2303.JPG307.8 KB · Views: 11
-
IMG_5788.JPG320 KB · Views: 12
-
IMG_6462.JPG198.3 KB · Views: 13
-
IMG_7040.JPG353.5 KB · Views: 10
-
IMG_7301.JPG194.3 KB · Views: 10
-
IMG_8608.JPG259.7 KB · Views: 10
-
IMG_8954.JPG313.1 KB · Views: 12