Vince33
Member
- Joined
- Nov 3, 2012
- Messages
- 59
- Reaction score
- 4
- Country
- Netherlands
So I installed my new A119S in my car. It's installed together with the GPS mount, so the mount is actually attached to the windscreen.
I notice that above certain speeds (at least above 100km/h) you see very light shaking in the video. I also know this because I compared it with my previous dashcam which was installed like this (http://www.puckstar.com/wp-content/uploads/2014/05/Panorama_DSC09211.jpg & http://www.puckstar.com/wp-content/uploads/2014/05/Panorama-DSC09204.jpg).
I can clearly see the difference when I look at the bottom part of the video where I can see my car dash. Panorama is steady as a rock, while A199S I can see small shaking.
I notice that between the A119S and the GPS model there is room for wiggling so probably that's why it shakes when driving a bit faster.
Now this isn't a very critical issue but there might be an occasion where because of the shaking I would not be able to clearly see a license plate. Also it's effect has more impact in low light situations.
Is there anything I can do to fix this?
And should the mount/cam design be redesigned?
I notice that above certain speeds (at least above 100km/h) you see very light shaking in the video. I also know this because I compared it with my previous dashcam which was installed like this (http://www.puckstar.com/wp-content/uploads/2014/05/Panorama_DSC09211.jpg & http://www.puckstar.com/wp-content/uploads/2014/05/Panorama-DSC09204.jpg).
I can clearly see the difference when I look at the bottom part of the video where I can see my car dash. Panorama is steady as a rock, while A199S I can see small shaking.
I notice that between the A119S and the GPS model there is room for wiggling so probably that's why it shakes when driving a bit faster.
Now this isn't a very critical issue but there might be an occasion where because of the shaking I would not be able to clearly see a license plate. Also it's effect has more impact in low light situations.
Is there anything I can do to fix this?
And should the mount/cam design be redesigned?