killfisher
New Member
- Joined
- May 10, 2017
- Messages
- 5
- Reaction score
- 0
- Country
- United Kingdom
hey all,hoping someone can help,ive got a mobius 2 that i use for airsoft,
ive installed a different lense,had the camera working fine for a few games,
well at the weekend the camera got over tightened in the mount,causing the
power button to get stuck in,which i didnt notice until returning home..after taking it out of mount the buttons seem fine..
so the short of it is the camera now will only display a yellow light for about 2 mins
it wont turn on,no other colour leds flash or show,ive tried the reset button,disconnected
the battery internally all to no avail,iver tried other leads and even another battery and sensor
so iam really hoping some one here can help or its a new cam for me...
many thanks in advance
kf
ive installed a different lense,had the camera working fine for a few games,
well at the weekend the camera got over tightened in the mount,causing the
power button to get stuck in,which i didnt notice until returning home..after taking it out of mount the buttons seem fine..
so the short of it is the camera now will only display a yellow light for about 2 mins
it wont turn on,no other colour leds flash or show,ive tried the reset button,disconnected
the battery internally all to no avail,iver tried other leads and even another battery and sensor
so iam really hoping some one here can help or its a new cam for me...
many thanks in advance
kf