Mobius action camera rear view setup

[Smile 4 da camera]

Hello, I would like to set up two Mobius cameras in my car. Installing one on the dash with velcro and running the lead down to the electrical power supply, no problem. However, I would like to attach a rear view Mobius camera on the hatchback of my vehicle, the problem for me is, how to set up a line from the rear of the vehicle to the power supply underneath the dash. What materials (cables) long enough to reach the front. Are there any kits complete to accomplish this task. I'd like to be able to just easily remove the cameras at will.
Thank you, any suggestions will be much appreciated.

 

[mac]

Get yourself a 12v to 5v regulator and connect it to a circuit in the rear of the car. There are a lot of them on ebay and amazon that already have a mini-USB plug on one end.

https://www.amazon.com/gp/B00CP1LQLY

 

[Smile 4 da camera]

Get yourself a 12v to 5v regulator and connect it to a circuit in the rear of the car. There are a lot of them on ebay and amazon that already have a mini-USB plug on one end.

https://www.amazon.com/gp/B00CP1LQLY

Thank you, mac. I will definitely check it out.

 

[russ331]

I'd like to be able to just easily remove the cameras at will.

Welcome to DCT. Just in case you don't know, Mobius is supplied with a mounting cradle. The camera can be slipped out of it's cradle if you want to remove it.

 

[Smile 4 da camera]

Welcome to DCT. Just in case you don't know, Mobius is supplied with a mounting cradle. The camera can be slipped out of it's cradle if you want to remove it.

Thank you, russ331