In my app and all the app i can remember back from testing there is just 1 place in the app for WDR, and thats ON or OFF.
When you run the calibration tool have the camera with the buttons facing down on the table.
Press update disk.
Select the drive letter for the camera.
Press start Gsensor.
X - Y and Z values alternating a little now appera.
Press revise Gsensor
Press start Gsensor.
Close the Gsensor tool.
Reboot camera ( power off / power on ) not sure if needed but i do that.
Yes it is freaky you cant just have the buttons facing up and then have the 2 options in the app be reverse, it only seem to work if camera is lying on table with buttons facing down.
I have flip 180 OFF in mode 1 and flip 180 ON in mode 2, and both have the footage the right side up ( mode 1 = buttons facing down as thats how camera is in my car, and mode 2 i have flip 180 On as i use the camera as action camera with buttons facing up )
If camera forget settings you might have a problem with the capasitor that hold the charge for the RCT, i am about to modify my #2 preproduction sample with a larger capasitor for RCT as it loose track of settings pretty quick.
My production sample camera have the Lipo battery so it have no problem keeping settings and time for a longer period.
This is a picture of the connections for the camera speaker and RCT capasitor, they are to the front of the PCB close to the lens.