USB MINI "SLIM" Head cable needed

[DashBoy500]

Hi, I have a Nextbase 320XR, I replaced the terrible sicky thing with a suction cup. But this has a slot and requires a Cable with a very slim Mini USB head and I'm looking for recommendations.

It's not hard-wired and goes to a standard USB slot in the cigarette lighter/power - needs to be about 5m.

I've found it quite hard to express to requirement here. I hope I have put across what I'm looking for correctly.

Thanks in advance.

 

[LateralNW]

Hi, I have a Nextbase 320XR, I replaced the terrible sicky thing with a suction cup. But this has a slot and requires a Cable with a very slim Mini USB head and I'm looking for recommendations.

It's not hard-wired and goes to a standard USB slot in the cigarette lighter/power - needs to be about 5m.

I've found it quite hard to express to requirement here. I hope I have put across what I'm looking for correctly.

Thanks in advance.

Welcome,
To help you paste a photo of the equipment or a link to the suction mount.
The official web site shows one suction mount but only a front on photo with little detail.

Cheers.

 

[Michael23]

Hello DB500,

This may or may not suit, but take a look anyway...

It's a "Tiny URL" link, as the eBay link is, as usual waaaay too long...

> https://tinyurl.com/ywhkb88h

Not too sure if they have 90 Deg right angle or 90 Deg left angle or any other types available.
Might pay to ask.....?

 

[DashBoy500]

Hi, Sorry for my late reply here are a few pictures


Above is the suction mount and below is where mini USB connection is. Its hard to see but that's a narrow slot and my current cables the head is too fat to fit in there,

 

[DashBoy500]

I am thinking a 90° conection but still worried it won't fit this is really narrow.

 

[Michael23]

Hi DB500,
According to the official site, a 90 Deg right angled plug should/will fit.
See my mediafire link of the connection.
For ref; > https://www.mediafire.com/view/j35v25j9imrxeuu/Nextbase-320XR-Power-Connection.jpg/file

Just get the orientation right. eg; Narrow section of plug at the top. I believe you need a 90 Deg left turn one.
If you can't find one like that, then you may need to buy a shorter one PLUS an extension lead to get your required 5 meters.

Lots of them on eBay.

------------------------------------

Q?...
If this is a newly acquired dashcam, does the original cable fit?
I cannot imagine them changing the connection port just because of the change to the mount unit.

Maybe contact the Official Site & ask for help?
> under > "ASSISTANCE" at the bottom.
> https://nextbase.com/hub/tag/support

 

[DashBoy500]

Thanks for the help. I got a 90° left turn cable and it fits perfectly.

 

[Michael23]

Hi DC,
You're welcome for the assistance.

Glad it helped you out.