VicoTF2+ High Bitrate edition...

ics said:
Can you tell me step by step (software that i need and what do i have to do) how did you change the identifier from timestamp?
Can be done also to a Marcus4, too?
Click to expand...
This is done in the hex editor. This can be done in Marcus 4 too...
How to do it step by step you can see here: https://yadi.sk/d/-EPB1C8hdcmSH
 
  • Like
Reactions: ics
great job - can you do that for Vico TF2 EZ ??
 
How come you changed the holder - was it to stop the focus drifting in heat with the black base or to give you more options with lenses as it's further away so you can use a longer lens module?
 
reverend said:
How come you changed the holder - was it to stop the focus drifting in heat with the black base or to give you more options with lenses as it's further away so you can use a longer lens module?
Click to expand...
Lost focus after work on a sunny day...
 
Ah this is a great solution to that - I have had too many cameras losing focus like that when they get too hot, this is a great fix 🙂
 
That's going to be a nice little camera that one 🙂
 
adamus said:
Can you translate to English ? 😉
Click to expand...
MOD Firmware VicoTF2 Premium version 5.0
------------------------------------------------------------
https://yadi.sk/d/fItvVsNIffCKm
------------------------------------------------------------
-FullHD - 20Mbit Constant Bitrate
-HD - 16Mbit (30FPS), 18Mbit (60FPS) Constant bitrate
------------------------------------------------------------
RAW Video:
Day - https://yadi.sk/i/zBSYlwtoeDMzB (720Mb)
Night - https://yadi.sk/i/S4LFi8Z4eEWNy (720Mb)
 
Last edited:
@Falsificator

Hi,
I have same Vico TF2+ Premium camera and currently using Vico's original v5.1i firmware. I couldn't see v6.3 on Vico's website. There is v6.6+CS. Could you please explain why are you using these modified v6.3 firmware over other firmwares? I see that you have also modified v6.6 but you don't use that firmware. What is the reason?

Thank you
 
popi said:
@Falsificator
Hi, I have same Vico TF2+ Premium camera and currently using Vico's original v5.1i firmware. I couldn't see v6.3 on Vico's website. There is v6.6+CS. Could you please explain why are you using these modified v6.3 firmware over other firmwares? I see that you have also modified v6.6 but you don't use that firmware. What is the reason? Thank you
Click to expand...
Firmware 6.3 has vico-schedule and better contrast and WDR (IMHO).
In the modified firmware higher bitrate and video quality.
 
Falsificator said:
Firmware 6.3 has vico-schedule and better contrast and WDR (IMHO).
In the modified firmware higher bitrate and video quality.
Click to expand...

Is v6.3 released and then unsupported or is it country specific firmware? Because I didn't know v6.3 existed until I read this thread.
 
popi said:
Is v6.3 released and then unsupported or is it country specific firmware? Because I didn't know v6.3 existed until I read this thread.
Click to expand...
Releases firmware for Russia and other countries differ only in the name of the firmware version.
At the moment, I am aware of these versions of firmware for VicoTF2+: 5.0 - 5.1 - 6.2 (6.3) - 6.6...
 
You must log in or register to reply here.
Back
Top