VIOFO BP100 Dash Cam Battery Pack - Test & Review PP

BP100 paired with A329S.
Firmware: V2.1 260702
See attached screenshots.

 

Attachments

  • BP100 Cut-Off Capacity .webp
    BP100 Cut-Off Capacity .webp
    12.4 KB · Views: 22
  • Vehicle Battery Protection .webp
    Vehicle Battery Protection .webp
    18.8 KB · Views: 22
  • BP100 Battery Capacity Text Stamp .webp
    BP100 Battery Capacity Text Stamp .webp
    27.2 KB · Views: 20
  • BP100 Connected .webp
    BP100 Connected .webp
    137.2 KB · Views: 23
Chuck McCoy said:
BP100 paired with A329S.
Firmware: V2.1 260702
See attached screenshots.

Click to expand...
What is the purpose of this update?

- Does it only allow the user to set the % capacity at which the BP100 shuts off?
- What is the practical benefit to setting 5/8/10/15% rather than Off?
 
TonyM said:
What is the purpose of this update?

- Does it only allow the user to set the % capacity at which the BP100 shuts off?
- What is the practical benefit to setting 5/8/10/15% rather than Off?
Click to expand...
I don’t know all the details to give you a good answer yet.
Basically it’s like how HK6 enables voltage based Hybrid Parking Mode.
This protocol enables Hybrid Parking Mode based on BP100 battery capacity.
 
Please keep in mind if you use this feature then you won't be able to check the status of your battery or batteries using the app on the phone


The portal shows the battery charging status percentage and estimated time etc

So there is a few things that have to be fixed because I would think ppl would still want to be able to access the battery app on their phone and use the battery percentage cut off feature
 
You must log in or register to reply here.
Back
Top