Wow, that's really bad. Where did you get it from?Here are some quality issues
View attachment 22656 View attachment 22657 View attachment 22658 View attachment 22659 After the polishing: View attachment 22660
Ebay, Estore009. I have received it like that.Wow, that's really bad. Where did you get it from?
Still no gps.
sorry guys we found the GPS signal receiving is 10db lower than it need, in the cameras we tested in lab.
the conductive interference which use charger cable as antanna made this happen.
yes the GPS can lock but the signal is weak so may lose connection at some area or some condition.
we are improving this and will update the further test results.
Hi,
I have GPS signal but the location is wrong.
Hi,
I have GPS signal but the location is wrong. Showing me in The Netherlands when I'm in London. Doesn't it affect the way it shows the speed data too? If they are going to correct the GPS module will we have an update version of it? or should I just send the unit back and ask for refund????
Where can I get the firmware update???that's a firmware problem
Where can I get the firmware update???
Get a blank SD card and put FIRMWARE.BIN file in the root directory. Turn on the camera and wait...How to upgrade the GPS firmware on the 903 ????
GPS Firmware does not exist.How to upgrade the GPS firmware on the 903 ????
1.)
I`ve formatted it to FAT32 with default Cluster Size, Type as Primary Partition
2.)
I`ve unpacked the mini0903-20160329-test20M.7z
3.)
From unpacked mini0903-20160329-test20M.7z, I`ve copied the FIRMWARE.bin to the MicroSD
4.)
I`ve put back the MicroSD to the Dash Cam
5.)
I Switched Off and On the Dash Cam. And voilà: It has upgraded automatically!
After the upgrading, you should delete this Firmware.bin file from the MicroSD (connected Dash Cam to PC as Storage or from the card reader) to avoid the upgrading loop.(UPDATE: The new Firmware - the Dashcam will delete itself this .bin file.)
...
I have NO GPS lock at all.
Yep, me too, had nothing over a 26K journey and then oddly it suddenly worked on the journey back home.I have NO GPS lock at all.
I did notice that the time had shifted about half hour in advance on time stamp???!
It's a bug in the firmware. You have to find the "right" time zone. My normal time zone is -5 but for this camera I had to set it to -2.Yep, me too, had nothing over a 26K journey and then oddly it suddenly worked on the journey back home.
Then on the following morning dead again! I guess its not a morning GPS.
I did notice that the time had shifted about half hour in advance on time stamp???! So I adjusted that but no joy. So I'm suspecting its buggy firmware that's useless in the southern hemisphere??