Reinstall the firmware. Be sure to use a USB charger (phone charger) during the update. Don't use your computers USB port.In the update phase Power cut
after not working
Not updated
Reset button pressed There was no change
How do I reset my software
Your putting just the .bin file in the root directory of the card correct. How are you powering the camera during the update?I was updating with him
Disconnected
I stayed half
Then did not open and not updating and not led lamp
tested V2.0 and 2.05 and 2.06
Update not started
Novatek is pretty difficult to Brick, re-updating firmware usually fixes that condition especially when you use the boot loader along with the firmware bin.
Nothing is immune from being permanently bricked though if you have a power surge and or disconnect in the middle of an update though.
Yes I tried againHave you tried connecting to power and loading it again?
It's been off for a long time. It has to be completely emptySometimes you need to wait for the super capacitors to fully drain so make sure you try again for sure (after it's been sitting unplugged for quite a while)
You have a one-year warranty see if your seller will service your camera even though it sounds like it was potential user error with the power disconnect during the update. If you were my customer I would still help you.
That's unfortunatebuy gearbest
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
L | Trouble accessing menu A119 while plugged into computer | A119 | 2 | |
D | Something strange while watching the recordings | A119 | 2 | |
P | Reboot While Using Menu | A119 | 0 | |
A119v1 mod fixes rebooting while driving | A119 | 0 | ||
What software do you watch your A119 videos with? | A119 | 24 |