Well, this is annoying, the 0906 just stopped working. Finally had hardwire kit wired up, all the wires ran nicely for the front and rear camera, got the parking guard mode to work...and out of the blue it just decide to stop working today.
It wont' even power up. Going have to remove all the trims again to check on the hardwire kit. Hoping it's just the fuse got blown.
Have you checked to see if it will power up with the 12V DC power plug?
https://www.ebay.com/itm/132337249906 If you need this hardwire,we can offer 5$ discount for you,thanks!
Best Regards,
Vicky
Found the problem, it's the hardwire kit. When reaching to the car, with the parking guard mode and the motion detect disabled, the module was very warm to the touch. This usually means one of the IC is burning way way power than it should. After removing the constant and then reconnecting, things work again, but the module is still way too hot.
So, do they sell the hardwire kit by itself?
I was going to order another 0906 for further testing to see how badly hose the hardwire kit is (didn't want to yank out the front and rear cam from the car), but the Veckle version just ran out of stock from Amazon.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
M | mini0906 focuses on dirt on windshield instead of road | mini0906 | 5 | |
Mini 0906 cable wanted | mini0906 | 6 | ||
W | What other web-cams can re-use the 0906 front/back cabling and P-guard kit? | mini0906 | 2 | |
Mini Series 0906 end of production. | mini0906 | 1 | ||
S | looking firmware for mini 0906 | mini0906 | 19 |