I bought a dashcam with a Cellink Battery B about 2.5 years ago. As of today, the Cellink has stopped working. If I turn it off and back on, I get three beeps with different tones (it goes low/medium/high). Neither the charging nor the full indicators come on. There is no power to my dashcam (no pass-through either).
I have used my multimeter to investigate. The Cellink is getting power. There is no power output from the Cellink irrespective of whether the input power is on or off (in other words, no passthrough). I have powered down the Cellink and waited 5 minutes, powered it back on and and held the reset button, with no fix.
Is this think dead? Or is there some additional troubleshooting steps I can go through?
Thanks!
I have used my multimeter to investigate. The Cellink is getting power. There is no power output from the Cellink irrespective of whether the input power is on or off (in other words, no passthrough). I have powered down the Cellink and waited 5 minutes, powered it back on and and held the reset button, with no fix.
Is this think dead? Or is there some additional troubleshooting steps I can go through?
Thanks!