Pinout AV output and FPV use

[ccdff]

Hi there,
I'm trying to get the Yi 4k to display a video output to my FPV transmitter. I tried using the same pins on the usb as the first YI but it does not seem to work.
Does anyone know which pins are used for the ground and video transmission on the micro usb connector ?
Do you need to me in recording mode to see a output or does the camera send a steady video stream, even if not recording ?

thx
ccdff

 

[mowbs]

It's the same pins for video and ground as the Yi 1 you just need to turn on TV out in the Yi 4k settings and should work. I use the same cable for both just fine.

Sent from my LG-D855 using Tapatalk

 

[patryykk5]

Hello, i have problem, I need cable for my Yi 4k Camera. So for sure you say, the av cable from Yi 2k will work with Yi 4k?

 

[hirsti99]

The AV out on the YI4K is the same as on the original Yi Camera. It is the same pinouts. It is also the same pinouts as the SJCAM AV out cable.
Just go to ebay and search for SJCAM AV Out cable and there are hundreds of different ones available. Please note the AV out is only SD quality.