hemi426
New Member
- Joined
- May 19, 2015
- Messages
- 13
- Reaction score
- 12
- Location
- Oregon,USA
- Country
- United States
- Dash Cam
- SG9665GC
I have had a SG9665GC V2 for 2 years now with zero issues if any kind--great cam
I recently acquired a used one with reboot problems.
1. Apply power--only power light is on, nothing else.
2. Apply power with blank card inserted--only power light on, nothing else.
3. Apply power with card inserted with latest firmware, three lights come on, firmware down loads,
camera comes on for 3 seconds and goes off and starts reboot cycle again and again.
Card is new Transcend 32gb Premium 400x from Amazon.
Reset button does nothing.
Using cigarette supplied power cord
Can't get into camera menu to do anything.
Can this be fixed or do I have a nice paper weight?
I recently acquired a used one with reboot problems.
1. Apply power--only power light is on, nothing else.
2. Apply power with blank card inserted--only power light on, nothing else.
3. Apply power with card inserted with latest firmware, three lights come on, firmware down loads,
camera comes on for 3 seconds and goes off and starts reboot cycle again and again.
Card is new Transcend 32gb Premium 400x from Amazon.
Reset button does nothing.
Using cigarette supplied power cord
Can't get into camera menu to do anything.
Can this be fixed or do I have a nice paper weight?