- Joined
- Jun 16, 2013
- Messages
- 35
- Reaction score
- 4
- Location
- London
- Country
- United Kingdom
- Dash Cam
- VicoVation, Cowon, JaewonCNC, Iroad, BlackVue
With newest firmware V1.58 you can use Vico-WF1 in Parking mode.
I have used Smart Parking Mid Sensitivity settings which allow you to avoid unnecessary motion recordings such as wind tree movement etc & also used reasonably priced (£25 inc del) Power Linker device to prevent my car battery from discharge.
Here is the link:
http://www.bebutton.com/Iroad-Ione-BlackVue-Cowon-DashCams-Car-Blackbox-Electric-Power-Controllers/Iroad-Power-Linkers
New Firmware V1.58 also offers extra features:
App Playback video Time-display bug fixed.
After setting into Smart Parking Mode, WF1 will detect the scenario
automatically. If car has been parked for 10 minutes (no movement), WF1 will
enter Sleeping Mode.
WF1 recording will be only activated when there is object movement
(people/cars) inside video shooting area, and recording last 30 seconds more
from the last object movement. Then WF1 will enter Sleeping Mode again when
there is no object movement.
During Sleeping Mode, LED indication light will breeze once every 10 seconds.
WF1 will not record in sleeping mode (when there is no motion detection).
When Car starts moving again, WF1 will get back to normal recording.
There are 4 levels motion sensitivity to choose, including Low / Mid / High / Max.
I have used Smart Parking Mid Sensitivity settings which allow you to avoid unnecessary motion recordings such as wind tree movement etc & also used reasonably priced (£25 inc del) Power Linker device to prevent my car battery from discharge.
Here is the link:
http://www.bebutton.com/Iroad-Ione-BlackVue-Cowon-DashCams-Car-Blackbox-Electric-Power-Controllers/Iroad-Power-Linkers
New Firmware V1.58 also offers extra features:
App Playback video Time-display bug fixed.
After setting into Smart Parking Mode, WF1 will detect the scenario
automatically. If car has been parked for 10 minutes (no movement), WF1 will
enter Sleeping Mode.
WF1 recording will be only activated when there is object movement
(people/cars) inside video shooting area, and recording last 30 seconds more
from the last object movement. Then WF1 will enter Sleeping Mode again when
there is no object movement.
During Sleeping Mode, LED indication light will breeze once every 10 seconds.
WF1 will not record in sleeping mode (when there is no motion detection).
When Car starts moving again, WF1 will get back to normal recording.
There are 4 levels motion sensitivity to choose, including Low / Mid / High / Max.
