Hello, I need some help, please.
Followed the instructions:
-changed S/N to US correctly
-downloaded firmware.bin from the google drive link
-formatted 8GB microSD card FAT32, copied firmware.bin onto it
-inserted into camera, powered it on
-some Chinese writing came up, I pressed a button, but now don't remember which one
-camera shut down
-when powered back up, both yellow and red lights are lit, screen is red with "YI See Different" on screen, and that's it.
-pressing reset button no help
-following directions on Yi support page:
"If YI Smart Dash Camera cannot boot normally, try push the reset button on the top of the camera with a pin. If the camera still cannot boot:
Download FWCARC10.bin to the micro SD card and put it in the root directory (make sure the file name remains FWCARC10.bin)
Insert the micro SD card in the camera
Connect the camera to a power source, then switch on the camera
The yellow light at the right-bottom corner of the camera will flash, but the screen remains dark (if the light is not flashing, push the reset button on the top of the camera with a pin)
Wait for 1-5 minutes before the update is successful and the camera is restarted"
does not help. Camera turns on, red screen with "Yi See Different" and that's it.
Have I killed it?
Any way back from this?
Thanks for any help.