Alberth-OC
New Member
- Joined
- Jan 8, 2016
- Messages
- 5
- Reaction score
- 0
- Country
- Brazil
Hello everybody, I'm trying installing a custom firmware to my Yi camera and I unpretentiously by the high bitrate and of course 1080P @ 60FPS. I wish someone would give me some hint of a good custom firmware or script? For I am using the stock firmware of the camera (just do not remember the version now). I am looking for something around 40Mbps to 50mbps at 1080P @ 60FPS, someone can show me a good?
Speaking of which, has anyone tested this firmware and can tell me if it is good and stable? You have to put these codes as script or just installing the firmware it comes with these presets? Hugs!
[I said:"cpurage, post: 179380, member: 18473"]There you go PpenoO:
https://drive.google.com/file/d/0B3VOFIlQpGN8b3E5YTkxdVJRbjQ/view?usp=sharing
Or you can even use the following script + stock FW 1.2.12:
#YiHyper-movie script by cpurage for 1_2_12 stock firmware
#set bitrate 848x480 240fps 50Mbps
writew 0xC05C28A2 0x4248
#set bitrate 1280x720 48fps 50Mbps
writew 0xC05C25A2 0x4248
#set bitrate 1280x720 60fps 50Mbps
writew 0xC05C2122 0x4248
#set bitrate 1280x720 120fps 50Mbps
writew 0xC05C2812 0x4248
#set bitrate 1280x960 48fps 50Mbps
writew 0xC05C2542 0x4248
#set bitrate 1280x960 60fps 50Mbps
writew 0xC05C2272 0x4248
#set bitrate 1920x1080 24fps 50Mbps
writew 0xC05C2482 0x4248
#set bitrate 1920x1080 30fps 50Mbps
writew 0xC05C1F72 0x4248
#set bitrate 1920x1080 48fps 50Mbps
writew 0xC05C2452 0x4248
#set bitrate 1920x1080 60fps 50Mbps
writew 0xC05C1EE2 0x4248
#set bitrate 2304x1296 30fps 50Mbps
writew 0xC05C1EB2 0x4248
#t ia2 -adj tidx [ev_idx][nf_idx][shutter_idx]", "-1 disable"
#looks like the values are between 0-16383 (0x0000-0x3FFF)
#If you want to set noise reduction value to 2048 just remove the hash key from the row below and for all the resolutions you will have sharpness as craze
#t ia2 -adj tidx -1 2048 -1
It is up to you, choice is yours
Speaking of which, has anyone tested this firmware and can tell me if it is good and stable? You have to put these codes as script or just installing the firmware it comes with these presets? Hugs!