I have read trough a few of posts here and can't make a conclusion about this camera. Is it usable now? I don't care about GPS and temperature. I would like best night time recording, average daylight and wifi to download clips. Does these work now?
Bought mine at gearbest and just received the unit today. I think mine is using a newer firmware than the one posted in http://nanodashcam.com/update.html. I am using wifi to view the live feed and download videos. So far so good but the video quality is somewhat lacking I expected it to be a lot better and I am disappointed very grainy in low light. but the audio is good except for the rattling sound occasionally. Here is my video running at 1080p @ 30fps NO Boost
Hi makona, does 0903 come with the GPS coordinates stamping? From your video, it does show it.
I tried enabling the GPS stamping but during the preview in final cam the coordinates are not updating. Is this normal @Rayman.Chan ?Yes, there is a selection in the settings you choose either gps logging or stamping
Recently purchased the Nanoq from an EBAY supplier. My First Dash Cam -Ordered it with the hardwire kit thinking it would be the parking guard hardwire kit. Unfortunately it was only a 2 wire step down converter with micro usb plug on the end. Is there any place you can purchase the parking guard kit?
please be noticed both the lens holder will not work.
the square area is too much hight seems to be 8mm but we need 4mm here (must be lower than 5mm, suggest lower than 4.5mm) and the square area should be 17*17mm to make sure the inside 15*15mm to contain the components inside.
what's your location?
Hello jokiin, can you look my message, about my problem. thanks.
https://dashcamtalk.com/forum/threads/nanoq-0903.15012/page-26#post-324000
I saw your message, what's your question?
looks like your window is not so clean maybe, the over exposure is a firmware problem, have seen the same results before on this model
Do you know about any new firmware?
Hey Rayman hello,
I bought mini 0903 3 months ago but nowadays i have some problems. One of is high brightness. I usually used 1080p but yesterday i tryed 720p 60 fps but its recorded high bright, when i stopped to record its turning normally.
Another problem is always recording very birght. i added day and night samples. I used latest firmware and many times gps connect is lost.
Hey Rayman hello,
I bought mini 0903 3 months ago but nowadays i have some problems. One of is high brightness. I usually used 1080p but yesterday i tryed 720p 60 fps but its recorded high bright, when i stopped to record its turning normally.
Another problem is always recording very birght. i added day and night samples. I used latest firmware and many times gps connect is lost.
Could you also fix timezone problem and oldest file deletion problems.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
M | NanoQ0903 - does not overwrite old recordings | Mini 0903 / nano Q | 3 | |
M | Support page for NanoQ 0903 firmware expires! | Mini 0903 / nano Q | 10 | |
B | NanoQ 0903-Plus | Mini 0903 / nano Q | 11 | |
nanoQ 0903 hardware update | Mini 0903 / nano Q | 48 | ||
Mini 0805 vs Mini 0903 (NanoQ) | Mini 0903 / nano Q | 25 |