I just purchased this(Mini 0807) recently and am experiencing issues with it missing recordings. It seems that every 5 minutes it will beep and reset the recording time. I am missing many videos. I am hoping that a firmware update will fix. However I cannot find where to download the newest...
So, my K1S was working, and the screen was displaying the Two Camera's. I have been using the DVR for a few weeks without issue.
Today, the screen is blank, you can tell the unit is on as there is a slight color change to the screen at power on.
I would like to reset the DVR back to Factory...
I purchased a G1W-CB, branded blueskysea, from estore009 within the past month.
It is the real deal and overall I'm happy with the performance.
One issue I have is it shuts down if I delay at ACC and allow the camera to full boot before starting the engine.
The install is in a 2nd Gen...
I recently received a G1WH, purchased from Spytec though Amazon, and I've been having issues. It's been suggested that I update the firmware in an effort to solve the problems, and I've downloaded the necessary .bin file from the Spy-tec website. I run into a problem when I attempt to unzip...
Hi,
I just upgraded the firmware of my "Non-brand LS300W GT300W" followed this site https://dashcamtalk.com/ls300w/.
It originally worked on version MTN01M-130828A and I tried to update it to "The latest firmware is 130823".
Apparently that version is not compatible with my dash cam because I...
Just bought a couple of mini 0805s. have found that both of them have an issue where sometimes you get no GPS data after power up. Definition: GPS symbol has red slash, and no position data written. NOT a poor coverage, metal windshield issue. GPS IS locked, and outputting data on the pins, so...
"Rear Sensor Not Insert" issue
I have a DR650GW-2CH that has worked fine since late 2014, I upgraded the firmware to version 1.007 and now the rear camera no longer will connect. I have verified that the cause is the firmware upgrade and not anything else like the cable, posting here to see if...