After experimenting with scripts for the Xiaomi Yi i finally succeded in creating the best possible footage from the Xiaomi Yi. Below a demo video. Because of youtubes compression it doesn't look as good as the RAW footage. Camera model is Z23L with stock firmware 1.2.12. I did the lens focus mod and the mic mod.
Filmed at 2K with 30fps and 25Mb/s bitrate.
No post processing done just the raw footage.
Intro download link: https://mega.nz/#!cMZWkSrY!RV8WNYAxOm...
Xiaomi Yi Settings:
Video quality: High
Video standard: NTSC
Auto low light: On
Adjust lens distortion: Off
Metering mode: Average metering
The script only works on firmware 1.2.12 !!!
Feel free to use this script. Create a text file in the root of your SD card called autoexec.ash and add the following lines:
#vibrance/saturation adjustments
t ia2 -adj ev 0 0 145 0 0 180 0
#shadow/highlight clipping adjustments
t ia2 -adj ae 90
t ia2 -adj autoknee 50
#set gamma level
t ia2 -adj gamma 10
#enable 14 scene mode
t cal -sc 14
#t ia2 -adj tidx [ev_idx][nf_idx][shutter_idx]", "-1 disable"
#looks like the values are between 0-16383 (0x0000-0x3FFF)
#set noise reduction value to 500
t ia2 -adj tidx -1 500 -1
#Set 2304x1296 bitrate to 25Mbps
writew 0xC05C1EB2 0x41C8
# set file size to 4GB
writew 0xC03A8620 0x2004
Filmed at 2K with 30fps and 25Mb/s bitrate.
No post processing done just the raw footage.
Intro download link: https://mega.nz/#!cMZWkSrY!RV8WNYAxOm...
Xiaomi Yi Settings:
Video quality: High
Video standard: NTSC
Auto low light: On
Adjust lens distortion: Off
Metering mode: Average metering
The script only works on firmware 1.2.12 !!!
Feel free to use this script. Create a text file in the root of your SD card called autoexec.ash and add the following lines:
#vibrance/saturation adjustments
t ia2 -adj ev 0 0 145 0 0 180 0
#shadow/highlight clipping adjustments
t ia2 -adj ae 90
t ia2 -adj autoknee 50
#set gamma level
t ia2 -adj gamma 10
#enable 14 scene mode
t cal -sc 14
#t ia2 -adj tidx [ev_idx][nf_idx][shutter_idx]", "-1 disable"
#looks like the values are between 0-16383 (0x0000-0x3FFF)
#set noise reduction value to 500
t ia2 -adj tidx -1 500 -1
#Set 2304x1296 bitrate to 25Mbps
writew 0xC05C1EB2 0x41C8
# set file size to 4GB
writew 0xC03A8620 0x2004