@Ant looks like you posted this question in another thread
https://dashcamtalk.com/forum/threa...hat-is-powered-when-the-ignition-is-on.42654/
I'll add a link once I upload some footage with these settings.
2560x1600P 30fps
Firmware v1.02 build 20190627
Bitrate = High
Loop recording = 3 Min on a Samsung 128GB EVO Plus U3
Video format = MP4
Exposure = +0.0
WDR = Off
Parking mode = Off
Parking G-Sensor = High Sensitivity
Parking Mode Detection = Middle Sensitivity ( I am not using it but there is no off setting)
Time-Lapse Recording = Off
Motion Detection = Off
GPS = On
Speed Unit = KM/H
G-Sensor = Low Sensitivity
Date Stamp = On
GPS Info Stamp = All Info
Camera Model stamp = On
Record Audio = On
Screen Saver = 30 Seconds
Boot Delay = 5 Seconds
LED = Off
Date/Time = DD/MM/YY
Time Zone = GMT+10
Language = English
Beep Sound = Off
Frequency = 50 Hz
Image Rotation = Off
Format = only when I need to do it.
Format Warning = Off
Default Settings = Only when I am setting it up for Installation or problems. (Haven't had any problems)
Car Number = I don't have anything entered here.
Custom Text Stamp = I don't have anything entered here either.
Firmware Version = v1.02 build 20190627
I use a polarisation filter and leave it on day and night. I'm happy with the image.
As a footnote:
I have an A119 V1 which broke
Another A119 V1 which I gave up on as it would drop off the power and loose recording (or never made them in the first instance)
A129 Duo This is in my main car and it does the job I want.
A129 Duo IR Works fine but the IR makes the cabin all red during the day due to the Infrared setup or using another setting black and white. Used in another car, has really bad GPS pickup.. almost useless.
and the
A119V3 This has the best image quality out of the others I have mentioned. I would use this as my main dash cam but I also needed the rear cam. I can't afford the price of the VIOFO A129 PRO DUO ULTRA 4K