Okay so I have just tested the RearView Mirror mount and the adhesive mount that i used on my TF2 and WF1.Will the Marcus 3 fit onto the adhesive mount hook for the TF2 line? Or did they change the design of the part on the unit where the hook latches onto it.
If you use the rear view mirror joint slide into the vico oem adhesive mount, it will not work well. Because the rear view mirror joint is just a tiny little bigger then the Vico OEM base.Okay so I have just tested the RearView Mirror mount and the adhesive mount that i used on my TF2 and WF1.
Both the rearview mirror and TF2/WF1 adhesive mount work as long as you use the Marcus 3 quick release bracket so that the camera is angled correctly. I am guessing, but have not tested that if you take the angled joint out of the adhesive mount that came with the Marcus 3 you could pop it into your existing adhesive mount with no issue.
I forgot I had mentioned that in the other thread, and you are correct.If you use the rear view mirror joint slide into the vico oem adhesive mount, it will not work well. Because the rear view mirror joint is just a tiny little bigger then the Vico OEM base.
I have a different rear view mirror mount and it does fit the marcus 3 properly. There you go and I think the smallest mount is still the oem adhesive mount.I forgot I had mentioned that in the other thread, and you are correct.
Rear view mirror mount on the left. Vico mount on the right.
oh yeah, i just share the info with the folks here. I hate these big mount. I only use clear 3m adhesive mount on all dashcams.can you not get a third party mount which is more heavy duty..... i like these cameras but still not using a screw mount really lets them down
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
W | VicoVation Marcus 3 SDCard capacity compatibility? | Marcus 3 | 1 | |
I | GPS causing Marcus 3 to reboot | Marcus 3 | 7 | |
I | Max Sd card Size for Marcus 3? | Marcus 3 | 2 | |
M | Marcus 3 problem | Marcus 3 | 8 | |
I | Nothing happens when trying to update firmware on Marcus 3 | Marcus 3 | 19 |