Just finished designing a small compact lightweight 4 camera kit, uses four Mobius C2 cameras (camera module + circuit board). 3D printed in PETG material, is well suited to dashcam and drone applications, at a budget price. More at Website I just started setting up at http://Vidit360.com Need to know of there is any
interest in this kit, if so, I will upload printable files to Thingiverse, and place printed kits on Ebay for sale at low introductory price ..in exchange for some assistance with defining best post processing video stitching methods... must be low cost (free is better) and fairly easy to use ... commercial software is absurdly expensive, and trial versions are limited... need something better!!! Help.
Based on the widely used Mobius action camera, Vidit360 is a Do-it-Yourself 360 camera solution targeted at R/C drone and action camera users. You buy the low cost case kit, insert your Mobius camera parts .. and you have a lightweight 120g 4K 360 camera for under $300.
Limited numbers of Vidit360 camera kits will be available on Ebay, starting in August 2016.
What parts are needed to build this awesome little 360 camera?
Features
Example of first attempted crude stitching with Autopano trial version .... need help from others to improve the quality of resolution and stitching, using freeware, faster processing, etc....
interest in this kit, if so, I will upload printable files to Thingiverse, and place printed kits on Ebay for sale at low introductory price ..in exchange for some assistance with defining best post processing video stitching methods... must be low cost (free is better) and fairly easy to use ... commercial software is absurdly expensive, and trial versions are limited... need something better!!! Help.
Based on the widely used Mobius action camera, Vidit360 is a Do-it-Yourself 360 camera solution targeted at R/C drone and action camera users. You buy the low cost case kit, insert your Mobius camera parts .. and you have a lightweight 120g 4K 360 camera for under $300.
Limited numbers of Vidit360 camera kits will be available on Ebay, starting in August 2016.
What parts are needed to build this awesome little 360 camera?
- the Vidit360 camera kit
- four Mobius C2 Cameras
- silicone wire
- optional: power converters
- 4K panoramic 360 video
- 120 grams
- 41 x 41 x 73mm body size
- Live FPV video feeds off all 4 cameras! (imagine real time stitching for full drone flying experience)
Example of first attempted crude stitching with Autopano trial version .... need help from others to improve the quality of resolution and stitching, using freeware, faster processing, etc....
Last edited: