murcod
Active Member
- Joined
- Sep 30, 2013
- Messages
- 501
- Reaction score
- 200
- Location
- South Australia
- Country
- Australia
- Dash Cam
- Mobius, A119v2, A119v3
I've just noticed random recording failures on a super cap equipped Mobius. It will run for a number of hours and then stop/ lockup with the rear LED solid red and the top LED solid orange (the manual mentions yellow or blue for that LED?) Normal operation is flashing red and orange(/ yellow?)
I'm thinking it's heat related possibly? I've tried formatting the card using the Mobius program (it's a 64Gb Samsung EVO Plus IIRC). It's failed twice since then after around 3-5hrs recording (out of the car, during "bench testing") It just sits there with both LEDs solid, when I switch the USB supply off the LEDs stay solid for a couple of seconds- until the super cap is fully drained at a guess? I can then turn it back on straight away and it will start recording again.
Any ideas apart from swapping the memory card and waiting another 3-5 hours?
I'm thinking it's heat related possibly? I've tried formatting the card using the Mobius program (it's a 64Gb Samsung EVO Plus IIRC). It's failed twice since then after around 3-5hrs recording (out of the car, during "bench testing") It just sits there with both LEDs solid, when I switch the USB supply off the LEDs stay solid for a couple of seconds- until the super cap is fully drained at a guess? I can then turn it back on straight away and it will start recording again.
Any ideas apart from swapping the memory card and waiting another 3-5 hours?