HardNougat
New Member
- Joined
- Nov 4, 2016
- Messages
- 14
- Reaction score
- 3
- Country
- United States
- Dash Cam
- Viofo A119
Hi all, I just successfully hardwired my A119 which is great but I wanted to make sure my ground wire is in a safe spot.
Here's a pic:
So the camera is fully functional with this setup but I was a bit concerned about the ground wire.
The bolt and washer you see there are one piece and do not come apart..so the ground wire is attached to the screw with a ring terminal, and secured down with that nut/washer combo. My concern is that the other side of the ring terminal is touching plastic, I assume that is OK but I just wanted to make sure with you all.
Thanks!
Here's a pic:
So the camera is fully functional with this setup but I was a bit concerned about the ground wire.
The bolt and washer you see there are one piece and do not come apart..so the ground wire is attached to the screw with a ring terminal, and secured down with that nut/washer combo. My concern is that the other side of the ring terminal is touching plastic, I assume that is OK but I just wanted to make sure with you all.
Thanks!
Last edited: