VIOFO A119 V3

[Tractor]

If you need V1.0 PM me

 

[fdnyfish]

here is my v2 camera starting right up

 

[OCD Tronic]

Does V3 + 3-wire kit power up when you bypass the GPS mount and plug direct into the side of the camera? If yes maybe something is wrong with that GPS V3 mount. Hard to say if it’s the hardwire kit or camera itself after that. Downgrade firmware to 1.0

 

[fdnyfish]

No it does not power up if bypassed GPS, i posted a video testing this.

 

[OCD Tronic]

If it works ok on firmware 1.0 but not 1.1 seems like a firmware bug. No other reports yet but you could be the first.

 

[fdnyfish]

Can someone please post/send me fw v1.00

 

[OCD Tronic]

Can someone please post/send me fw v1.00

I don’t have it handy. Tractor said:

If you need V1.0 PM me

I’d like a copy as well.

 

[fdnyfish]

With WDR set to OFF, the camera powers on correctly. With WDR ON, it will not power up. Can someone else try to replicate this please.

 

[Tractor]

BCHobbyist as already posted the link.
here:
@BCHobbyist said "Avoid pressing Power button, once its set for power on condition will it now turn on automatically?
Alternate power issue troubleshooting by changing power source to power bank or 5 volt 1amp smartphone adapter/charger."

A119 V3 FW v1.00 download = https://drive.google.com/open?id=1RD-YR3ZXfMs3_nLLNrVimWRLj_Hsb836

 

[vvs49]

With WDR set to OFF, the camera powers on correctly. With WDR ON, it will not power up. Can someone else try to replicate this please.

I checked!!
I have everything ok, in all modes!
Firmware 1.01
In the menu, set the delay on the switch - 5 seconds.

 

[CaptureYourAction]

Maybe try a firmware V1.01 reload.

 

[vvs49]

I have a 1440P monitor and this is how it shows !!
Pixels straight clogged.
Does anyone have a piece of the originals of the video, compare?

I'm doing resolution 1440 on A129 and everything is OK

 

[Tractor]

It looks to me like the reflexion in your windscreen. I have not seen any pixel "clogging".

 

[ineedaname]

Yea I agree with tractor. Looks like it's caused by the windshield. Maybe you can try the CPL?

 

[fdnyfish]

went back to FW 1.00 and all is fine again

 

[fdnyfish]

Had my CPL positioned wrong.......

 

[OCD Tronic]

went back to FW 1.00 and all is fine again

@viofo will identify and fix the bug I’m sure.

 

[vvs49]

Yea I agree with tractor. Looks like it's caused by the windshield. Maybe you can try the CPL?

The glass has nothing to do with, standing next A129D and everything is ok.
119 with the filter CPL
This sharpness can give such a picture.
It is necessary to edit the firmware.

Had my CPL positioned wrong.......

Yes, you have exactly the same !!!

P. S.
Well, tomorrow I will check in the shade.

 

[jokiin]

here is my v2 camera starting right up

how long has the hardwire kit been installed?

 

[jokiin]

With WDR set to OFF, the camera powers on correctly. With WDR ON, it will not power up. Can someone else try to replicate this please.

odd problem but at least a repeatable bug is the easiest type to fix