70MAI Pro custom firmware.

[mrgormsby]

I tried the D05 firmware on my D02 and the 70mai gave me a failure error. This isn't the first time i've tried to update firmware and I know it can be a little tricky. If anyone has info on the midrive D02 vs the D05 please share.

 

[regflex]

Is there any way to change the frame rate?
For example, from 30fps to 27.5fps etc.

 

[nutsey]

Is there any way to change the frame rate?
For example, from 30fps to 27.5fps etc.

Unfortunately we have only 30 and 25 fps modes implemented in sensor driver.

 

[micmac]

I tried the D05 firmware on my D02 and the 70mai gave me a failure error. This isn't the first time i've tried to update firmware and I know it can be a little tricky. If anyone has info on the midrive D02 vs the D05 please share.

hi,
mine is D02 update to D05 1.0.6na & 1.0.7na with success.

 

[nutsey]

Guys, check your cam's S/N.

 

[regflex]

Unfortunately we have only 30 and 25 fps modes implemented in sensor driver.

Thank you for your reply, I understand that it was a fixed implementation on the sensor driver side.

 

[nutsey]

Thank you for your reply, I understand that it was a fixed implementation on the sensor driver side.

Yes. There is a chance to modify it by patching some sensor regs, but I don't have the tech datasheet for the IMX335 sensor.

 

[xcqckng]

Thanks for sharing 🙂

 

[muniek62]

hi,
mine is D02 update to D05 1.0.6na & 1.0.7na with success.

you could send a link to this software and a description of how you installed it

 

[micmac]

you could send a link to this software and a description of how you installed it

here..

Gofile - Cloud Storage Made Simple

Secure, fast and free cloud storage solution. Upload and share files instantly.

gofile.io

 

[ajeboot]

hi nutsey,
where can we get the 1.0.7na file?

Greetings.. am a newbie here. Mine is still at 1.0.5na I received several months ago .. where can I get the 6na upgrade??

 

[ajeboot]

hi,
mine is D02 update to D05 1.0.6na & 1.0.7na with success.

Greetings.. am a newbie here. Mine is still at 1.0.5na I received several months ago .. where can I get at least the 6na upgrade??

 

[muniek62]

https://gofile.io/?c=wOMZJ5 here you have 1.0.6. https://gofile.io/?c=K6L4Ya here you have 1.0.7.

 

[raymondloo]

Hi, I'm a bit confused here. Hoping someone can clear me up.

Do i need to install the original 1.0.7 firmware, then install the V3 patch?

Or

Directly install the V3 patch?

Thanks for your guidance.

 

[micmac]

Hi, I'm a bit confused here. Hoping someone can clear me up.

Do i need to install the original 1.0.7 firmware, then install the V3 patch?

Or

Directly install the V3 patch?

Thanks for your guidance.

you should upgrade first, then install v3

 

[nutsey]

Flickering test.

What do you think?

 

[muniek62]

Hi, we are waiting for the final and the v4 link

 

[SuMMoN]

Can we separate normal video duration and parking mode video duration?

 

[micmac]

Flickering test.

What do you think?

looks good!!!

 

[Roturbo]

Flickering test.

What do you think?

Hello Nutsey.


I don´t know if is youtube encoding, but look at the top (sky), light pole are full or artifacts, missing frames etc,
you can see it before enter the tunnel is much worst.

In general the video quality is not good before the tunnel,, also if you notice on camera timer at second 26
just a few seconds before the end of the tunnel the picture quality gets much better and clear.

After the tunnel the light poles are almost normal, and in general the video quality
is also better than before.

Just my 2 cents.

Regards