power magic pro

  1. U

    Can the Blackvue B-124X Power Magic Ultra Battery Pack and the Power Magic Pro BlackVue Vehicle Battery Discharge Prevention be used together?

    Hi. I am not yet fully versed in these things, so please bear with me! Can I hard-wire a Blackvue B-124X Power Magic Ultra Battery Pack to an always-on fuse via a Power Magic Pro (PMP) BlackVue Vehicle Battery Discharge Prevention (BDP)? My goal is to use the B-124X battery pack to support...
  2. M

    A119/A119 Pro hardwire kits.

    Hello, i'm new to this forums. I am trying to hardwire my a119 (front)/ a119 pro (rear) using blackvue power magic pro but i want to use just 1 Cigarette Adapter Power Cable provided by viofo to power both dashcam via usb cable. Is it safe to do that? Please help! Thank you.
  3. Unicorn

    New Dash Cam Recommendations for Work Van?

    I am in the market for a couple of new cams for my work van. At the moment I have a Transcend Drivepro 200 mounted beside the rear-view mirror, and a Mobius mounted near the rear window looking backwards. I’ve had this setup for a couple of years now and it works fine, but is in need of being...
  4. S

    I'm Baffled! Can someone help!

    Hi guys, Newbie here! I wonder if someone can help me pleaseeee...I fitted the dr650 2ch into my BMW e70 X5. All worked well for a week and now the rear camera stops working and so does the power magic pro. If I pull out the power cable and reconnect it from the front camera, the rear camera...
  5. Ferginator

    Which side of a fuse is Hot vs Cold?

    I have gone up and down the internet trying to look for this but not getting a clear answer. When I type on how to find the difference of the 2 sides, all I get are explanations telling me what each function is like hot is loader and cold is receiver and not how to physically identify which one...
  6. 7DayCam

    New parking mode kit for BlackVue / reviewer wanted

    BlackVue, DDPai Dash Cams with AAC and Parking Mode Installation Now Simplified with New Snap N Go OBD II Connector Please contact us thru direct message or facebook(7daycam) Summary: Snap N Go OBD II Connector for BlackVue Dash Cams with AAC and Parking Mode. This product allows vehicle...
  7. M

    blackvue dr650s-2ch Am i missing something?

    After reading many many reviews and doing my extensive research, this was supposed to be the BEST camera out there. Yet after forking out over £500 for the 128gb version plus the magic pro power pack and all it's other bits, i don't see what the big deal is? It's directly comparable to a £40...
  8. K

    Battery Discharge Prevention Kit with DR650S-2CH ?

    Which one is recommended? 1) BlackVue Power Magic Pro - Doesn't have great review anywhere 2) Lukas LK-290 - If so then Type A or B? No idea.. 3) Vico Power Plus - Double the cost of Lukas so unless it is really the one to go .. Setup will basically be for hardwired to battery with discharge...
  9. 7DayCam

    How about a 5 minutes installation ODB version "Power Magic Pro"?

    Many customers complained the PMP installation took too long time to install. So we designed a prototype OBD power adaptor for BlackVue dash cameras. It is quite simple to install. You just need to plug the OBD connector to your OBD port under the steering wheel and connect the DC part to the...
  10. A

    wrapping wires directly on fuse

    hello all, Not sure if this is the right board, but I have a question regarding installing the Power Magic Pro. Assuming I have the correct fuse locations (still working that out), would it be fine to wrap the ACC and Battery wires directly on the fuses as seen in the following video: The...
  11. C

    GS98C - Parking mode and Hardwire

    Hi guys! I am not new here but I upgrade my computer and forgot my password... so.. hello again! So.. I have the GS98C dash cam - http://www.szdome.com/product-detail-20.html now I noticed to the parking mode and I know you need a hardwire for this option (if you want to leave that option on...
  12. L

    Hardwiring without PMP?

    I'm approaching the 1 year mark of owning my Blackvue DR650 GW 2 ch camera. The camera has had recording gaps from the beginning. In March, the distributor replaced the SD card. The problems continued. In November, the camera was sent in without the power cable, the coaxial cable and SD...
  13. 2

    BlackVue DR3500 w/ Power Magic shutting down...

    Hello all, I recently just reinstalled my BlackVue D3500 with Power Magic Pro in my 2014 Hyundai Elantra Limited. The camera setup was previously installed and worked flawlessly with my Genesis Coupe, and served its purpose with the unfortunate accident I had with the car. Fast forward 2 months...
  14. I

    I finally got my dash cam wired - now to see if everything works correctly ...

    Aloha everyone, I asked a lot of questions and got a lot of good information here. I've never had a dash cam before and I didn't want to screw anything up, so I want to thank y'all for all the responses to my other threads. I worked with a coworker today and installed the add-a-circuit fuse...
  15. I

    2014 ML350 pre-installation questions

    Aloha everyone, I just placed an order for a DR650GW-1CH and a Power Magic Pro. When I looked at the wiring diagram for my vehicle, I was a bit dismayed to find that I won't be able to use the fuse box on the passenger end of the front console. I, instead, have to use the fuse box located...
  16. alexsoll

    Updated _ Power Magic Pro

    Updated Power Magic Pro
  17. egonvdv

    SOLD. Power magic pro

    Hello! Got 1 Power magic pro's for sale on Ebay http://www.ebay.fr/itm/331821717624
  18. J

    Blackvue 650 not starting up when ignition turned on

    I have the Blackvue 650 2CH in my Seat Ibiza ecomotive vehicle which is connected with the power magic pro. Initially when the unit was purchased things were working pretty much as they should have but just recently the Blackvue has not started up when the ignition has been switched on, the unit...
  19. M

    hardwiring blackvue powermagic pro in e60

    Hi Noobie here. Sorry if this has been covered before but wondering if anyone knows how to best hardwire the blackout power magic pro to an e60 5 series without going to the fuse box? I have a dr650 and would like to get a constant power feed and switched power without messing about with fuse...
Top