I have the 2CH A129 DUO dash cam installed in my cadillac CTS 2014, i noticed recently some weird behaviors so i had to get my car checked several times to the dealer, to my surprise yesterday the dealer told me that nothing is wrong with my car after a very very long and detailed diagnostics, several visits and test drives. they eventually had to use a computer to pickup any error codes in the car, they said (and it seems true) that whenever the camera was disconnected all functionalities of the car are back to normal, before you ask i was seeing my tire pressure sensors (which communicated Wirelessly with a special module inside the vehicle) were stopping at Random times, i had them replaced twice, and the dealer was confused too, but apparently the Viofo was guilty as charged !... i latter on drove my car, and my car sensors stopped responding and an error poped up on the dashboard, i simply disconnected the viofo from the power source, and within just seconds that error was gone and all sensors worked back normally !...
I am surprised really because wifi was disabled in the camera, i was using 50 Hz setting in the cam, and the cam was simply running of 12v power ! i tried Both 12v power sources, they Both lead to the same outcome, i then tried connecting the viofo to my portable standalone powerbank, to my surprise that gave that error too !!... not really sure how that is even occurring coz supposedly all cables are shielded etc...
Any advise or explanation to this strange phenomena ?
Thanks,
I am surprised really because wifi was disabled in the camera, i was using 50 Hz setting in the cam, and the cam was simply running of 12v power ! i tried Both 12v power sources, they Both lead to the same outcome, i then tried connecting the viofo to my portable standalone powerbank, to my surprise that gave that error too !!... not really sure how that is even occurring coz supposedly all cables are shielded etc...
Any advise or explanation to this strange phenomena ?
Thanks,