Blackvue DR600GW-HD (increased bitrate)

[alanplum241276]

alexsoll,

I've just donated on your site and sent you a PM with the transaction number. (I hope I did ..... Struggled a little with the Russian)

Can you let me know if I have done it correct please.

Thanks

 

[dyel74]

Hi @alexsoll

Can you advise when the 15Mbps custom firmware will be available?

Thanks!

 

[Stevesau]

My frame rate and bitrate with Alexsoll custom firmware from yesterday. What a huge difference. No more jitter on play back and much better picture. Thanks to him again.

 

[alexsoll]

in the coming days will be a new custom firmware

 

[TooTall]

 

[alanplum241276]

alexsoll,

Just wanted to say "Thank You" for your custom firmware. I've only just received my DR600GW, and your firmware makes this device amazing compared to the standard firmware.

Keep up the good work, and looking forward to lots of use on my new device.

Looking forward to the 15Mbps version of the firmware

 

[bobby14]

Any faster wifi speed like you did on DR650 custom?

 

[dyel74]

in the coming days will be a new custom firmware

Hi @alexsoll - any updates on the release of the 15mbps custom firmware?

 

[alexsoll]

base firmware v1.004:

1. wi-fi copies the files 2 times faster than it was.
2. fixed "dark"

https://yadi.sk/i/-XrMGNPDfBiYE
https://yadi.sk/i/xXg54qf6fBiZB
https://yadi.sk/i/-xhb_zASfBiaU
https://yadi.sk/i/NWSRrhTzfBibD
https://yadi.sk/i/MVH8POeffBic2
https://yadi.sk/i/QXFkGXLIfBid2

 

[alanplum241276]

Will we see the Custom version soon alexsoll?

 

[alexsoll]

The firmware is, but it is not tested, no free time for this

 

[TooTall]

No problem, take your time!

 

[aroncz]

Hi all.

I got a small problem...
I did:
1. Register + donate HERE
2. Download the custom firmware by Alexsoll
3. SDcard in computer, change language to Russian. SDcard in Blackvue, let it restart. Shutdown.
4. SDcard in computer, format, copy over the whole folder with the custom firmware. SDcard in Blackvue, let it start, it starts upgrading the software.

There is BLUE and RED led flashing and some waring repeated every a few seconds.
Warning is in Russian so I used Google Translate and warning says "please memory card"
I left that for 10 minutes and that waring is still the same.

I thought is says memory card is not visible but when I removed card waring was different "Memory card please insert the memory card"

Any idea how to fix it?

 

[jokiin]

@alexsoll is the expert on these

 

[alexsoll]

what's difficult? where'd you get Russian language?

1. To format the memory card
2. To place on the memory card folder Blackvue (from the unpacked archive)
3. Enable 600 and wait for updates.

 

[aroncz]

Thank you Alexsoll for reply.

Russian language after that:
"4. ...... SDcard in Blackvue, let it start, it starts upgrading the software."

I left 600 turned on by 10 minutes and still same Russian warning like on the beginning.

I just downloaded '600_v1.003E_13mbs' and will try it Tomorrow.
I tried '600_v1.003R_13mbs' before.

 

[alexsoll]

I tried '600_v1.003R_13mbs' before.

will often try, not knowing what you are doing - will "brick"

 

[alanplum241276]

YES!

New firmware from alexsoll

Will get this installed tomorrow.

 

[alexsoll]

significant changes

 

[alanplum241276]

Such as?

I did notice faster WiFi finally.