DR400G-HD II to DR500GW upgrade ?

[Cju]

Hello
sorry for my very very bad english

I have a DR400G HD II with the following software ver. 2.032-HD-E Firmware ver. 1.014 400GII E
can i use the firmware from DR500GW to DR400G HD II
and how do I do that ?

if I try this I get the following error message "The Model Information is Different"

best regards

 

[jokiin]

can i use the firmware from DR500GW to DR400G HD II

not possible

 

[Cju]

@jokiin Thanks

@DashCamDave


a higher bitrate would be great

can you help my step by step ?

I can flash the russian 1.010-155(2012_1110)_RU directly to 1.014 _engl ?
or I must first install the 1.040 ?

 

[Cju]

where can I find custom 1.014E ?

missing in the version that I find 1.014K(2013_0408) cramfsImage_400GII, cramfsImage_400GII.sue,uImage_400GII and uImage_400GII.sue

 

[Cju]

I also found this link unfortunately the link is down -> http://qcloud.o2.sg/downloads/BlackVue_1.014_ENG.zip
the file still exists somewhere ... Please help, I could cry

 

[Cju]

you have the file ... you can download it here -> http://www.file-upload.net/ (no registration required)
and then give me the download link ...would it be possible ???

if not I have to wait for the car-dvr forum ...

 

[Cju]

you are the best thank you

I will report if it works

if you want you can delete the link again

 

[Cju]

Hi

the first good news it works

I have adapted the version.bin as follows

[firmware]
version = 1.014
model = 400GII
language = English
[software]
version = 2.032
model = 400GII
language = English
[config]
version = 1.010
model = 400GII

-then copy blackvue folder and avserver.sh to formatted sd card
-put into the DVR and turn power on
-wait to the lady says "upgrade the brightview please do not turn off the power"
-after a short time, she says, ironically "The version information is different.” ... ???
-turn off power
-remove sd card now
-put it into card reader and format
-put it again to DVR and turn on
- time to enjoy the video files are 12000k/bits

but i have a new problem ... i have no "beep sound" no "starting normal recording" and so on
is it because of this line in the avserver -> mv -f /mnt/nand/voices/KOR /mnt/nand/voices/ENG


how can I fix it ???
how do I get back to the sound's

 

[Cju]

oh yes, sorry my error ... the version.bin not the config.ini
I changed it up

yes i have checked the volume level is not zero ...
after the upgrade the line is no longer present in avserver.sh ... that's right

ok thanks again Dave

maybe someone else can help ....

 

[Cju]

it's ok Dave

the file (BlackVue-1.014_ENG.zip) is indeed more a patch from 1.14Korea to 1.14eng

for me it was already 1.014E

maybe it's because the update does not completely (how do you say) passes through ? until the end ?

normally should come after the update the message "BlackVue is restarting"
but by me come the message "The version information is different.”

then i must turn off the BlackVue ...
after then i take the sd card out the DVR and formatting or delete

sorry again for my bad "harakiri" english

 

[Cju]

Dave ... thanks for the subject in the other Board, I have likewise new Thread there opened
would useful if you supported me there (in your thread) my Russian end levels is like zero
(but only if you have time)


edit:
here's a bad picture with 7500 k/Bits



and a good picture with 10000 K/Bits


it is again better with 120000 K/Bits

 

[Cju]

Dave you take no blame ... you are not responsible

I'm glad that i have the possibility/opportunity the video bitrate to change
so I am the (as we say in germany) "Master of Disaster" (the master of destruction)
the video was partially horrible, when filmed many trees, shrubbery or dark roads
there are 7500 k/Bits too little

 

[Mio]

Hi guys.
I can not find 1.014E (for DR-400 II)
Share a link to this firmware, you can in your private messages
watched logs not find anything wrong, I want to make a firmware with an increased bit rate based on the original 1.014E

 

[Mio]

, ок

 

[Mio]

The latest version of the application(BlackVue Viewer for Windows v2.101 (English)) works with DR 400 II?

 

[Cju]

now only I read this
unfortunately, I have none original 1.014E for DR-400 II ...I have found up to now only Korea version
I can ask with pleasure with the German trader adam-gmbh.com ?
if the version (1.014E) somebody finds, I would have them also