galagaheart
New Member
- Joined
- Sep 20, 2017
- Messages
- 8
- Reaction score
- 2
- Country
- Japan
- Dash Cam
- Q3H-2
It seems that the both of imx179s.ko and imx179s_8.ko are used while the cam works(The cam doesn't work without either of them). Curious to say, in mx179s_8.ko a string "A low-level driver for ov8838 sensors” is found. Why?
The firmware is https://drive.google.com/file/d/0B4tyaJWIqCb_Rm5zWjdqbTlIeDA/view?usp=sharing
in GoPrawn nutsey's firmware collection.
I'd like to make the ISP processing disabled. I think the edge enhancement is too strong. How should I do?
Regards.
The firmware is https://drive.google.com/file/d/0B4tyaJWIqCb_Rm5zWjdqbTlIeDA/view?usp=sharing
in GoPrawn nutsey's firmware collection.
I'd like to make the ISP processing disabled. I think the edge enhancement is too strong. How should I do?
Regards.
Dear guys, I am a newbie of hacking cams.
I bought a Q3H-2 with imx179s. It has imx179s.ko and imx179s_8.ko in rootfs of the original firmware.
I replaced the imx179s.ko with the one shared at the first post in this thread, but my cam stopped at the logo screen.
How should I do to use 1080/60p mode with native resolution?
Thank you for your helping me.