Hsolver
Member
- Joined
- Sep 14, 2018
- Messages
- 71
- Reaction score
- 41
- Country
- Russian Federation
- Dash Cam
- Viofo A129 Duo
..The new firmware support 2 wires and 3 wire with ACC hardwire kits ..
Hi, Viofo, found usefull improvement to be made in FW.
Because you've implemented "direct logic" in ACC-Park signal, the FW can not detect 2/3-wire kit type without ACC active wire.
I use separate Power controllers (Vico, Magic) with power switch, and when I switch it in ON while parking, the FW starts in NORMAL recording, not parking. On the fact it does not see ACC wire (but Mini0906 with "inverted logic" can). FW once recognizes 3-wire Kit only after ACC activation, but forgets about it after power reswitching. The customer must be able to switch any power controller ON (without ACC) and get Parking mode.
You can solve this problem very easy - to add in FW menu option to set hardware type with "3-wire kit installed" checkbox (2-wire by default). And in 3 wire mode FW will be able to start in PARKING MODE without ACC signal - any time.
Last edited: